You will need a paper plate with three holes punched, cloth scraps, yarn, and a popsicle stick with a long string tied to it ( can use yarn or something thinner). First, take something round and trace a circle with it in the center of the plate. Cut the circle out. Punch the holes in a triangle formation, two across from each other on one side of plate, and one on bottom in the middle distance of those two on the top. See picture below. Then you may decorate the plate.
Next, take a thin string that is tied to a popsicle stick and thread it through the top two punched holes and tie off. It should also make a triangle shape, refer to the picture below to see how it is tied. Then, cut your cloth scraps into small strips. If you would like to color them, you can do that! You will tie them in the center with your yarn so you have a string of yarn with the scraps tied on, like the picture below!
Then you will tie one end of the yarn to the last punched hole in your plate. This is the kite tail. Take your kite outside and fly it by holding the popsicle stick and unwinding some of the string as you move with your kite!